Sun Pumps PCA-30M1D - Manual (Page 10)

Figure 3 Dip Switch Settings
Switch Switch
Description Function
Default
Setting
Number Position
1 ON 12-17 Volt Panel Direct
Sets Controller for a 12 to 17
volt input.
OFF
2
ON 24 Volt Battery System
Sets Controller for a 24volt
battery input.
OFF
3 ON 24-34 Volt Panel Direct
Sets Controller for a 24 to 34
volt input
ON
4 OFF Remote Switch Logic
Turns pump Off when terminals
connect.
OFF
4 ON Remote Switch Logic
Turns pump On when terminals
connect
OFF
5 OFF Not Used At This Time
Should be in the off position for
proper operation.
OFF
6 ON Low Water Cut-Off
Turns pump off at low current
set point and starts timer.
OFF