Studio Technologies 85 - Manual (Page 10)

Issue 4, June 2011 Model 85 User Guide
Page 10 Studio Technologies, Inc.
Specifications
AES/EBU Inputs: 2
Type: capacitor isolated, transformer coupled
Receiver Equalization: none
Impedance: 110 ohms, nominal
Amplitude Range: 0.3 to 7 Vp-p
AES/EBU Outputs: 8
Type: transformer coupled
Impedance: 110 ohms, nominal
Level: 3.0 Vp-p, terminated, nominal
Input-Output Time Delay: 60 nSec, nominal
AES/EBU Performance Compatibility: designed
for compliance with AES3-1992 (ANSI S4.40-
1992), AES Recommended practice for digital
audio engineering—Serial transmission format for
two-channel linearly represented digital audio data
LED Indicators: 3
Function: 1 power present, 2 signal present
Fusing: 1
Type: 5 x 20 mm time lag (Littelfuse 218-series or
equivalent)
Rating: 0.400 A for 100 and 120 V mains power,
0.200 A for 220/240 V mains power
Connectors:
AES/EBU: 3-pin XLR-type, female (2), male (8)
AC Mains: standard 3-blade plug, meets IEC 320
specifications
AC Mains Requirement: 100, 120, or 220/240 V,
±10%, factory configured, 50/60 Hz, 100-120 V
0.4 A maximum, 220/240 V 0.2 A maximum
Dimensions (Overall):
19.00 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
6.65 inches deep (16.9 cm)
Mounting: one space (1U) in a standard 19-inch
rack
Weight: 7.0 pounds (3.2 kg)
Specifications and information contained in this
User Guide subject to change without notice.