Studio Technologies 68 V.1 - Manual (Page 22)

Issue 2, June 1999 Model 68/69 User Guide
Page 22 Studio Technologies, Inc.
for Surround
Press and hold an input
button (one at a time) to
display and select which
channels associated with
that input are active.
Model 69 Configuration—Input Channels Active
When an input button is pressed, these
LEDs display which input channels are
active for that input. A lit LED indicates
that the channel is active. Use the buttons
to change the configuration.
Default: For inputs 1 and 2, all six channels (L, C, R, LS, RS, SUB) are active.
For inputs 3 and 4, both channels (L, R) are active.
Note: A special input disable function is available. By disabling all channels associated with a specific input,
that input will no longer be available during normal operation. While in the configuration mode, all LEDs
associated with an input will flash to indicate that the input has been disabled. This function is useful if
an input is not going to have a source associated with it. Then during normal operation this input cannot
be selected, minimizing any confusion caused by selecting an invalid input source.
&