Studio Technologies 5204 - Manual (Page 11)

Model 5204 User Guide Issue 1, August 2014
Studio Technologies, Inc. Page 11
Model 5204
Dual Line Input to Dante Interface
Specifications
Network Audio Technology:
Type: Dante Audio-over-Ethernet
Bit Depth: up to 24
Sample Rates: 44.1, 48, 88.2, and 96 kHz
Network Interface:
Type: twisted-pair Ethernet with Power-over-
Ethernet (PoE)
Data Rate: 100 Mb/s (10 Mb/s Ethernet not
supported)
Power: Power-over-Ethernet (PoE) per IEEE 802.3af
class 3 (mid power,
≤12.95 watts)
General Audio Parameters:
Frequency Response: 20 Hz to 20 kHz, ±0.5 dB,
line input B to Dante
Distortion (THD+N): 0.01%, measured at 1 kHz,
+4 dBu, line input B to Dante
Dynamic Range: >100 dB, A-weighted, line input B
to Dante
Line Input A:
Type: 2-channel (“stereo”) unbalanced, capacitor-
coupled
Input Impedance: 10 k ohms
Nominal Level: adjustable using rotary level control,
–3 dBu @ 100% rotation
Maximum Level: +10 dBu
Line Input B:
Type: 2-channel (“stereo”) electronically balanced,
capacitor-coupled
Input Impedance: 20 k ohms
Nominal Level: adjustable using rotary level
control, +11 dBu @ 100% rotation
Maximum Level: +24 dBu
Meters: 2
Function: displays level of Dante output signals
Type: 7-segment LED, modified VU ballistics
Dedicated Charging Port:
Function: powering and charging of connected
devices; no data interface
Output (Nominal): 5 volts DC, 1 amp (5 watts)
Compatibility: auto-detect supports divider mode,
short mode, and 1.2 V/1.2 V charging modes
Connectors:
Ethernet: Neutrik etherCON RJ45
Line Input A: 3-conductor (“stereo”) 3.5 mm jack
Line Input B: 2, 3-pin female XLR
Dedicated Charging Port: USB type A receptacle
Dimensions (Overall):
4.2 inches wide (10.7 cm)
1.7 inches high (4.3 cm)
5.1 inches deep (13.0 cm)
Mounting Option: bracket kit
Weight: 0.8 pounds (0.35 kg)
Specifications subject to change without notice.