Studio Technologies 5204 - Manual (Page 10)

Issue 1, August 2014 Model 5204 User Guide
Page 10 Studio Technologies, Inc.
Model 5204
Dual Line Input to Dante Interface
There are no LEDs or performance indica-
tors or configuration settings associated
with the dedicated charging port. It’s really
just a “plug-in and go” feature.
Technical Notes
Ultimo Firmware Update
The Model 5204 implements Dante con-
nectivity using the Ultimo integrated circuit
from Audinate. This 2-input/2-output de-
vice can be updated by way of the Model
5204’s Ethernet connection. As of the date
of writing this guide it’s not evident as to
whether or not newer firmware will ever
need to be loaded.
Identifying the Firmware
Version Number
As previously discussed in this guide,
upon power up the meter LEDs are used
to briefly display the version number of
the Model 5204’s firmware (embedded
software). This information is typically only
necessary when working with the fac-
tory on support issues. The meter LEDs
will first go through a display sequence
followed by an approximately 1-second
period where the version number will be
indicated. The top row of seven LEDs will
display the major version number with a
range of 1 to 7. The bottom row of seven
LEDs will display the minor version number
with a range of 1 to 7. Refer to Figure 2 for
details.
Figure 2. Detail of front panel showing the LEDs that display the firmware version.
In this example, the version shown is 1.1.
Major Version Number
1 2 3 4 5 6 7
 O O O O O O

O O O O O O
.1 .2 .3 .4 .5 .6 .7
Minor Version Number