beautypg.com

Studio Technologies 220 2004 User Manual

Page 19

background image

Issue 2, August 2004

Model 220 User Guide

Page 20

Studio Technologies, Inc.

Talkback Output 1 Button Mode
Switch SW3-3 configures how the talkback
output 1 button functions.

Two modes are available:

• Push to talk: In this mode talkback out-

put 2 is normally muted. The output will
become active whenever the button is
pressed and held.

• Hybrid: This mode is a combination

of push to talk and alternate action. If
the button is pressed and held, talkback
output 2 will become active until the but-
ton is released. If the button is momen-
tarily “tapped” the output will change
state. Upon power up talkback output 2
will be in its muted state.

Talkback Output 2 Function Mode
Switch SW3-5 configures the overall
operation of talkback output 2.

Figure 9. Talkback output 2 button mode
settings

Two modes are available:

• Enabled: In this mode the talkback

output 2 button and the line-level audio
output associated with talkback output 2
operates normally. Whenever the button
is active the audio output is also active.

• Disabled: In this mode the talkback

output 2 button and associated audio
output are disabled. The exception is
if the auxiliary relay is configured to fol-
low the status of the talkback output 2
button. In this case the button will be
active to control the relay; the audio
output will remain disabled.

Figure 10. Talkback output 2 function mode
settings

Figure 8. Talkback output 1 button mode
settings

Two modes are available:

• Push to talk: In this mode talkback out-

put 1 is normally muted. The output will
become active whenever the button is
pressed and held.

• Hybrid: This mode is a combination of

push to talk and alternate action. If the
button is pressed and held, talkback
output 1 will become active until the
button is released. If the button is
momentarily “tapped” the output will
change state. Upon power up talkback
output 1 will be in its muted state.

Talkback Output 2 Button Mode
Switch SW3-4 configures the way the talk-
back output 2 button functions.