SP Controls CatLinc - Manual (Page 8)

CatLinc HD
The CatLinc HD allows component video (Y/Pb/Pr or YUV) connection
between two devices using CAT5, CAT5e, or CAT6 twisted pair cable.
Connection is made to devices using 3 standard RCA connectors. No con-
figuration is necessary.
The CatLinc HD can extend a component video signal up to 365m/1200ft
over standard CAT5. For shorter distances (110m/350ft or less), system
power may be attached at either the Transmitter or Receiver. For distances
greater than 110m/350ft, the CatLinc Transmitter and Receiver must both
be powered. In this case, an additional power supply must be separately
ordered (part no. CatLinc PS).
CatLinc VID/S-VID/HD CatLinc VID/S-VID/HD
TRANSMITTER RECEIVER
INDICATES POWER
IS PRESENT
INDICATES POWER
IS PRESENT
(Figure 5) (Figure 6)
6