Southern States 15.5 kV-38 kV CapSwitcher - Manual (Page 7)

Title: Southern States 15.5 kV - 38 kV
CapSwitcher ®
Vertical Interrupter Style Capacitor Switcher
Product Specification
Guide
Page 7 of 8 Publication No.: PSG-809-101714
6.03.02 Heater and Coil Resistance Tests
The resistance of each heater and coil shall be confirmed to be within
specifications and the value(s) shall be recorded.
6.03.03 Closing Resistor Value Tests
The value of the resistor in each interrupter shall be confirmed to be within
specifications and shall be recorded.
6.04 Dielectric Tests
6.04.01 Control Circuit Dielectric Test
The completely assembled and wired operator control circuit shall pass a
dielectric test of 1500 V for 1 minute.
6.04.02 Interrupter Dielectric Test
Each interrupter shall pass a power frequency withstand test at 60 Hz for
one minute. The required test value shall be at least three times rated
line-to-ground voltage.
7.0 SPARE PARTS
No spare parts shall be required to be purchased at the time of capacitor switcher
purchase. Stock shall be maintained at the manufacturer available for rush
shipment in the event of an emergency need.
8.0 DOCUMENTATION REQUIREMENTS
8.01 Drawings
The manufacturer shall furnish drawings of the capacitor switcher in AutoCAD
.DWG format or Adobe Acrobat .PDF format via e-mail. The purchase order will
designate the name and e-mail address of the individual to whom the drawings
should be forwarded.
8.02 Instruction Books
The manufacturer shall furnish an electronic copy of the instruction book via e-
mail, transmitted to the same individual that the final drawings are to be sent to
unless purchaser otherwise instructs manufacturer at time of purchase order
placement.
8.03 Additional Documentation
One complete set of drawings and one copy of the instruction book shall be
shipped in a weatherproof envelope with each capacitor switcher.
9.0 SHIPPING AND DELIVERY
All capacitor switchers shall be shipped completely assembled and fully pressurized,
ready for quick and easy field installation.