SoundFreaq SFQ-05 - Manual (Page 11)

.10.
3. Once completed, the pairing success
screen will come out.
Note: Don’t quit the page immediately. You
may notice that the previous dialog screen
still shows the device not connected.
Just ignore it. It’s confusing to the user.
In fact, it’s connected already.
4. Open iTune, play a song. Then use the
mouse to click the Bluetooth icon at the top
right hand corner of the desktop screen,
select the “Sound Rise” option and then
select the “Use as Audio Device (Stereo)”.
After a while (a few seconds), the music will
come out from the SFQ-05. If not, select the
“Use as Audio Device (Stereo)” once again.
The Sound Quality should be good.
Playing back from PC/Notebook
1. Press the “Start” button to open the “Device
and Printers” dialog box.
2. Turn on the SFQ-05 system and press the
SET button on the unit to put the unit into
the pair mode.
3. Select the “Add a device” in the “Device and
Printer” dialog box. The “Sound Rise” icon
will appear on the display.
4. Double click the “Sound Rise” icon and wait
until the device has been added
successfully.
5. Click the “Close” button to close the “Device
and Printer” dialog box. A ”Sound Rise” icon
appears in the dialog box.
6. Double click the “Sound Rise” icon and the
device connection screen will be shown.
7. Click the “Connect” button in the “Music and
Audio” option.
8. Once connected, the pair indicator on the
unit will be solid on and the connection
success screen will be shown.