SOMFY THERMO SUNIS INDOOR WIREFREE RTS SUN SENSOR Installation - Manual (Page 16)

16 Page
EN
Copyright © 2008 Somfy SAS. All rights reserved.
Questions and answers
Fault Cause Deletion
The shutter/blind
does not react
to sun and/or
temperature
The sensor is off. Switch the sensor on
Page 9
The sensor has not been
programmed.
Program the sensor
Page 10
The threshold values have
been incorrectly set.
Correct the threshold values
Page 12
The battery is weak. Replace the battery
Page 14
The sun sensor cover is
dirty.
Clean the cover
Page 5
The sensor is incorrectly
positioned.
Reposition the sensor
Page 8
The shutter/blind
moves too
frequently The sensor is in demonstra-
tion mode.
Change the sensor to normal
mode Page 13
The shutter/blind
reacts incorrectly A bright light source is
affecting the sensor.
Switch off the light source and
select a new location
The shutter/blind
does not react to
the sun or only
moves in one
direction
There is no favourite position
(“my”) programmed into the
motor.
Program the “my” position
( corresponding installation
instructions)
or set the sensor to mode 1 .
For any additional information, please contact your dealer or our
technical assistance Pages 62, 63