Smithco Wind Star Blower 55-100 (Sn W100) Parts & Service Manual - Manual (Page 10)

SERVICE
BREAK – IN SERVICE
After the first hour of use:
1. Check belts. Retension if needed.
2. Tighten set screws on bearings.
3. Check nuts, bolts and fasteners to see that they are secure.
LUBRICATION
Lubricate grease fitting on bearings and PTO shaft.
TROUBLESHOOTING
BELTS
Problem
What to Check
Belts
slip Tension adjustment
Load may be excessive
Bearings may have seized
Belts wear rapidly
Pulley’s may not be properly aligned
Belts, jump, catch or twist Check with straightedge across faces of pulleys
INTAKE AND DISCHARGE
Problem
What to Check
Lack of air flow
Intake congested
Discharge plugged
8