Smithco Spray Star 1750 (sn 175G046 – 175G072) Parts & Service Manual - Manual (Page 81)

79
Accessories
NOZZLE ASSEMBLY PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1* 16-920-03 O-Ring 1
2* 16-920-05 Diaphragm Teflon (Optional) 1
3* 16-920-06 Diaphragm EPDM Rubber (Standard) 1
4* 16-798 Chemsaver End Cap 1
5 16-800 Gasket Viton 1
6 16-921 Cap 1
7 15-588 Turbo Turf Jet Tip #8 1
* 16-996 Body 1
When the 16-920-05 Teflon Diaphragm is used, it is placed in the assembly in front of the
16-920-06 EPDM Rubber Diaphragm. Nozzles are located 20" (51 cm) apart on the right,
left, and center tubes. There are predrilled holes in all tubes. The Nozzle should be at a
45° angle to the ground for proper application.
For all 18' Booms: The eleven 16-996 bodies are installed on the boom sections. The
eleven 16-800 viton gasket, 15-588 Turbo Turf Jet Tip #8 and 16-921 cap are in the small
parts bag.