Dodge 2008 Ram 2500 PowerWagon - Manual (Page 97)

The following are general phone to UConnect
௡ System
pairing instructions:
• Press the “Phone” button to begin.
• After the ЉReadyЉ prompt and the following beep, say
ЉSetup Phone Pairing.Љ
• When prompted, after the beep, say ЉPair a PhoneЉ and
follow the audible prompts.
• You will be asked to say a four-digit pin number,
which you will later need to enter into your cellular.
You can enter any four-digit pin number. You will not
need to remember this pin number after the initial
pairing process.
• For identification purposes, you will be prompted to
give the UConnect ௡ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
• You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect
௡ system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect
௡ System. The priority allows the
UConnect
௡ system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect
௡
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to
ЉAdvanced Phone
Connectivity Љ).
Dial by Saying a Number
• Press the “Phone” button to begin.
• After the ЉReadyЉ prompt and the following beep, say
ЉDial.Љ
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97
3