Dodge 2008 Ram 2500 PowerWagon - Manual (Page 351)

“Light Load” Reset Switch Operation – If
Equipped
• This vehicle may have different recommended tire
pressure values between the front and rear tires as
shown in both the Tire Loading Information Label and
the Supplemental Tire Pressure Information Label
(located on the rear face of the driver door). It is also
equipped to be driven with tire pressures appropriate
to either a Light Load condition or the vehicle Max
Load condition.
• The “Light Load” reset switch will allow the driver to
change between the max load inflation pressure (cold)
low pressure warning threshold and the light load
inflation pressure (cold) low pressure warning thresh-
old depending on the vehicle’s load condition. Refer to
the “Supplemental Tire Pressure Information” label for
the vehicle’s Light Load inflation pressures and “Tire
and Loading Information ” label for the vehicle’s Max
Load inflation pressures.
Light Load Reset Switch
STARTING AND OPERATING 351
5