Smithco Spray Star 1010 Aug 2013 Operator Manual - Manual (Page 11)

9
Introduction
PARTS MANUALS AVAILABLE ONLINE AT smithco.com
CONTROLS & INSTRUMENTS
N. Spray Boss Control - Engages and disengages speed boss. Forward
is engage and all the way back is disengage. When the lever is
engaged it sets a stop for the accelerator. The accelerator pedal must
be used to maintain this speed. To adjust speed use the knob on the
end of the lever, counter clockwise increases speed and clockwise
decreases speed. Disengage the lever and you will have full accelera-
tor pedal range.
O. Cup Holder - Holds standard cup.
P. Master Boom Switch - is used to override the master switch on the
computer console of the spray systems.
Q. Reverse Pedal - This pedal controls ground speed in the reverse
direction.
R. Accelerator Pedal - This pedal controls ground speed. Press pedal to
increase speed. Varying the amount of movement of the pedal will
vary the ground speed.
MASTER BOOM SWITCH
The master boom switch (P), located on the left floorboard is used to override the master switch on the computer
console of the spray systems. By pushing down it will turn on/off the booms. For the Raven 440 System the
Master Switch on the computer must be off for the master boom control switch to work.