ATI Technologies RADEON 9000 - Manual (Page 30)

26
Connecting to a TV or a VCR
To connect your graphics accelerator card to a TV or
a VCR, use a S-Video cable. However, most TVs
(and VCRs) have a Composite video input, in which
case you can use the supplied S-Video-to-Composite
video adapter. If your TV has cable input only, you
can connect your card to your TV through your VCR
or an RF modulator (available in most electronics
stores).
Connecting S-Video Out to a TV or VCR
1 Turn off your PC and your TV (or VCR).
2 Ensure your card was installed correctly as per
the Getting Started Guide.
3 Determine if your TV (or VCR) has a S-Video or
Composite video connection.
4 Looking at the back of your PC, locate your S-
Video Out. Using a S-Video cable or the supplied
adapter, attach one end of the cable to your
graphics card and the other to your TV (or VCR).
Refer to the illustration for further help.
5 Turn on your PC and your TV (or VCR) .