Smithco Super Star 42-00x (sn 6310 – 6378/13820 – 13854) Parts & Service Manual - Manual (Page 80)

A-25
Front Attachment
42-800 ROP
REF# PART # DESCRIPTION QUANTITY
1 76-198-03 Seat belt 1
2 HB-716-14-100 Bolt 7 /
16
- 14 x 1 2
3 HB-716-14-125 Bolt 7 /
16
- 14 x 1 1 /
4
8
4 HNTL-716-14 Lock Nut 7 /
16
- 14 10
5 42-802 Right Seat belt Bracket 1
6 42-803 Left Seat Belt Bracket 1
7 42-801 ROPS Bar 1
INSTALLATION INSTRUCTIONS
The Following ROP instructions apply to all Super Star Machines.
After wheels are mounted and machine is all set up.
1. Line up the mount plate on the ROPs to the square mounting plate by
the seat, with the bend in the ROP bar toward the rear of the machine.
2. Place four bolts in the outside mount plate holes and tighten.
3. Place the seat belt brackets over the inside mount holes and bolt in
place with the remaining four bolts. The seat belt bracket are mounted
with the bends to the outside and the holes to the front
4. Mount seat belts onto seat belt bracket. The strap goes on the left side
and the lock goes on the right side.
8. Tighten all hardware.
ROPs have been certified to meet OSHA 1928.52 and seat belts are certified to OSHA 1928.51.
ROPs come standard on Diesel Super star 43-000-B starting serial number 14068.
15-622 Weather Canopy available for the 42-800 ROPs.