Chapter 2: installation – Smart Avi HDTV Router User Manual

Page 8

Text mode
Original mode

Chapter 2: Installation

Connecting the Communication Cable: RS-232

Each unit can be controlled by a RS-232 port connected from the back of the chassis. The SmartControl
software will be used to control the units.

Connect the RS-232 cable the control computer by connecting the female RS-232 connector

into the male RS-232 connector of the PC. Turn the side screws so that it does not
accidentally become disconnected
Connect RS-232 cable connector to the male RS-232 connector on the back of the chassis.