Smart Avi HDMV Multiviewer - Manual (Page 9)

9 www.smartavi.com
OR
USB to RS-232 Adapter Cable
RS-232 Cable
RS-232 Operation and Console Commands
The HDMV may also be controlled via RS-232 commands; this feature requires an RS-232 card
installed on your computer or a USB to RS-232 adapter. First connect the RS-232 cable between
your PC and the HDMV.
Next connect to the device using HyperTerminal or a similar serial
data application and an DB9 for RS-232 connection. The settings for
the connection are shown in the picture on the right.
Any serial data application similar to HyperTerminal will be able to
connect to the HDMV provided the Bits per second are 115200, the
data bits are set to 8, the Parity is “None,” the stop bits are “1,” and
there is no flow control. HyperTerminal comes standard on windows
XP and can be enabled on Windows Vista, Windows 7, and Windows
8. There are many applications available for windows, Linux, and
Mac operating systems.