Smart Avi HDMV Multiviewer - Manual (Page 6)

6 www.smartavi.com
Connecting the Box
To switch to Full Screen Mode press the button “FULL” on the front control panel and then select
the desired channel 1, 2, 3, or 4.
To switch to picture in picture mode press “PiP” on the front control panel and then select the
desire channel 1, 2, 3, or 4.
To switch to Quad-Mode press “QUAD” on the front control panel and then select the desired
channel 1, 2, 3, or 4.
The power connection and switch are located at the back of the unit as well as the RS-232
connection and all HDMI and USB inputs and outputs. Connect all peripheral devices first and
turn them on before powering on the HDMV.
Modes
Using the Front Control Panel