Smart Avi SignWall - Manual (Page 7)

7
www.smartavi.com
OTHER
DDC Signal 5 Volts [peak-to-peak], TTL
TDMS Signal 1.2 Volts[peak-to-peak], TTL
Power External 5VDC2A @ 10W
Dimensions 8.625”W x 1.75”H x 2.175”D
Weight 0.5 lbs.
Approvals Device: CE, ROHS
Power Supply: C-UL US, CE
DVI-D VIDEO
Format DVI-D Single Line
Maximum Pixel Clock 165 MHz
Input Interface (4) DVI-D 29-pin female
Output Interface (4) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @60Hz
DDC 5 volts p-p(TTL)
Input Equalization Automatic
Input Cable Length Up to 10 ft.
Output Cable Length Up to 10 ft.
Included EDID-Mirror-4P EDID Emulator
Technical Specifications
• Learn up to 4 EDID configurations at once
• Stores EDID configuration in non-volatile
memory so that the unit may be powered
off and the configuration will not be lost
• Displays can be disconnected as needed
without losing EDID configuration
• Uses standard EDID configuration standards
• Compatible with most DVI-D displays and all
Windows versions
EDID provides plug-and-play capability to your
displays. When you plug a display into your
computer, the EDID table in the display tells the
computer the optimal resolution to use.
ABOUT EDID
The EDID-Mirror is a DVI-D EDID (Extended Display Identification Data) emulator that
supports up to 4 DVI-D displays. EDID-Mirror will learn and emulate the EDID configuration
of the displays, so that the displays can be disconnected without losing their configuration.
The EDID information stores the resolution and timing information for each connected
display. The EDID mirror provides the computer with a constant EDID signal, regardless of
whether the displays are connected or not. This is particularly useful when using operating
systems, including Windows 7, that reset display configurations when the displays are
disconnected. The EDID-Mirror is a time saver that offers the freedom to switch displays
while eliminating the headache of EDID configuration.