Smart Avi HDR-4x4-Plus - Manual (Page 5)

HARDWARE INSTALLATION
1. Turn off all input devices and displays.
2. Connect (4) HDMI cables from the input devices to the IN-
PUT ports of the HDR-4x4-Plus.
3. Connect the displays to the (4) OUTPUT ports on the HDR-
4x4-Plus.
4. Power on the input the devices, displays, and the HDR-4x4-
Plus.
SWITCHING VIA FRONT-PANEL KEYS
Front-Panel keys
 Button A: Select the input source for HDMI output A
 Button B: Select the input source for HDMI output B
 Button C: Select the input source for HDMI output C
 Button D: Select the input source for HDMI output D
 LEDs 1,2,3,4: Shows the input source which is selected
 Act: Shows if the corresponding input signal is active
 Link: Shows if the sink device is connected
 Button EDID: Select the EDID
+ Auto: Default EDID
+ Manual: User can configure the EDID manually.
+ 2D: 2D-compatible EDID
5