Smart Avi RK-DVX200 - Manual (Page 5)

5
www.smartavi.com
Installation Diagram Two - Endpoint to Rack
RK-DVX200
RECEIVER
COMPUTERS
DVX-TX200
TRANSMITTER
Up to 225 ft
over STP
1. Power off all devices.
2. Connect up to 16 DVI-D sources (computers) to the DVI-D ports of up to 16
DVX200 transmitters.
3. Connect each of the DVX-200 transmitters to the RK-DVX200
receiver with one STP (Sheilded Twisted Pair) cable per
transmitter.
4. Connect up to 16 DVI displays (or optional DVI-D outputs) to
the ports on the rear of the RK-DVX200 receiver.
5. Connect the power to the RK-DVX200 receiver and the DVX-200 transmitters.
6. Power on the computers and displays.
DVX-200 Transmitter