Smart Avi RK-DVX200 - Manual (Page 4)

4
www.smartavi.com
Installation Diagram One - Rack to Endpoint
RK-DVX200
TRANSMITTER
COMPUTERS
16 DVI-D
DISPLAYS
DVX-RX200
RECEIVER
Up to 225 ft
over STP
1. Power off all devices.
2. Connect up to 16 DVI-D sources (computers) to each of the 16 DVI-D ports on the
rear of the RK-DVX200 transmitter.
3. Connect the RK-DVX200 transmitter to the rear of each of
the DVX-200 receivers with one STP (Sheilded Twisted Pair)
cable per receiver.
4. Connect up to 16 DVI displays to the DVI-D ports on the
front of the DVX200 receivers.
5. Connect the power to the RK-DVX200 transmitter and the DVX-200 receivers.
6. Power on the computers and displays.
DVX-200 Receiver