DENSO CORPORATION CLASSIC PLUS 26 - Manual (Page 14)

CONSTRUCTION, SPECIFICATIONS & DATA
6
Rating Conditions
dry bulb 95 o F (35 o C)
wet bulb 83 o F (28.3 o C)
humidity (60%)
Specifications
power frequency 60Hz
line voltage, single phase 208/230V
power consumption 3.37/3.24 Kw
current consumption 16.8/14.6 Amps
power factor 97%
starting current 62A
power cord 12 (3-core) AWG
Cooling Unit
cooling capability 6,500 Kcal/hr
26,000 Btu/hr
cooling system direct expansion
Blower
type of fan centrifugal fan
air volume: Evaporator (high speed) 708 cfm
Condenser (high speed) 1680 cfm
motor output (high speed) .59/.63 Kw
(low speed) .54/.56 Kw
Compressor
type hermetic scroll
output 1.6kw
refrigerant type R-22
refrigerant capacity 1.87 lbs. (0.85 kg)
Safety Devices
compressor overload protector included
fan motor protector included
anti-freezing thermistor included
full drain tank switch included
automatic restart (power interruption) included
compressor time delay program included
Dimensions & Weight
W x D x H (in.) 19.4 x 28.7 x 47.2
W x D x H (mm) 492 x 730 x 1200
weight (lbs/kg) 235/107
Operating Conditions
inlet air (relative humidity) 113 o F (45 o C), < 50%
70 o F (21.1 o C), > 50%
Control Device
temperature control included
two speed fan included
Specifications Specifications are subject to change without notice.