Dixon 966 004901 - Manual (Page 8)

8 - Husqvarna
ASSEMBLY
BAGGER ASSEMBLY
Attach hitch tube to support bracket with 1. 3 /
8
-16 x 2
shoulder bolts and secure with flange nuts.
HITCH TUBE
SUPPORT BRACKET
Place the support bracket against the frame rear 2.
guard. Using the outer right hole and inner left
hole, secure with 5 /
16
x 1 bolts and 5 /
16
nyloc nuts.
Attach support tube to frame hitch with ½ x 2¼ bolt 3.
and ½ nyloc nut.
SUPPORT BRACKET
HOLES
ATTACH HITCH TUBE TO
FRAME
Place the hood / hitch assembly onto the hitch 4.
tube.
Open the hood and secure the (2) springs to
5.
the bolts on the hood assembly and the hitch
assembly.
ATTACH SPRINGS TO
HITCH AND HOOD
SET HOOD/LATCH ASSEMBLY
ONTO HITCH TUBE