SIGMA DP2x - Manual (Page 94)

93
TO MARK A SINGLE IMAGE
1
Use the button to select the image to be marked in Contact Sheet
or Single-Image View.
2
Open [ Playback Menu](P.26) by pressing the button and
select [Mark].
3
In Open Display, select [Mark] by pressing the button and press
the button.
4
Close [ Playback Menu] by pressing the button.
• A icon will appear in the upper-right
corner of the image indicating that the
image is marked.
UNMARKING A SINGLE FILE
To unmark a marked image, select the marked image then select
[Unmark] in step 3 and press the
button.