SIGMA DP2x - Manual (Page 50)

49
z
When the camera is in focus (the focusing point is illuminated in green), it
is possible to magnify the display by pressing the
button while the
shutter button is pressed halfway. (Whilst the display is enlarged, is
displayed on the color LCD monitor.) To revert back to the normal display,
press the
button again whilst pressing the shutter button halfway.
FOCUSING POINT SELECTION
The DP2X is equipped with 9 focusing
points and it is possible to select the
desired focusing point.
1
Press the button.
2
Press the button to select the
desired focusing point, and press the
button to apply it.
FOCUS LOCK
This photographic method is useful if the subject is not positioned
within the selected focusing point.
1
Position the photographic subject into the selected focusing point, and
focus by pressing the shutter button “half-way”.
2
When the subject is in focus, the selected focusing point will be
illuminated in green. Press the shutter button to take the picture.