Sierra Video FRS-181 - Manual (Page 14)

Page 14 of 27 FRS-181 Owner’s Manual
• (V 2.1)
Audio Submenu
Menu Structure Parameter Type
Aud Embd Grp1 Enbl Embedded Group Enable
Ch01-
Ch04
(x4) Src Output Source
Gain Output Gain
Pol Output Polarity
Grp2 Enbl Embedded Group Enable
Ch05-
Ch08
(x4) Src Output Source
Gain Output Gain
Pol Output Polarity
Grp3 Enbl Embedded Group Enable
Ch09-
Ch12
(x4) Src Output Source
Gain Output Gain
Pol Output Polarity
Grp4 Enbl Embedded Group Enable
Ch13-
Ch16
(x4) Src Output Source
Gain Output Gain
Pol Output Polarity
Tone TG1-TG4 (x4) Tone Frequency
Embedded Group Enable
Enables or disables the embedding of a particular embedded audio group. Disabling a group preserves
the settings of the channels belonging to that group.
Output Source
Because the cards audio system functions like a router, each output can be sourced from any input
channel. This parameter lets you choose from the many different sources. Here is an explanation of the
different source names:
Source Name Description
EmXX Input embedded audio channel XX (1 through 16)
TgX Test Generator channel X (1 through 4)
DbX Dolby Decoded channel X (1 through 8)
DmX Dolby Mixdown channel X (1 through 2)
Output Gain
The gain of each output is adjustable from +30 dB to –100 dB in 0.1 dB steps. After –100 dB gain is
set to –Inf, which means that output is present, but muted.
Output Polarity
If set to “Norm” output polarity is the same as input polarity, if set to “Inv” the output polarity is
inverted. This can be used to correct polarity errors in the input signals fed to the card.
Tone Frequency
This sets the frequency of the test tone for each of the four tones. Each of the four tones TG1 – TG4
can be set to a different frequency, and are available as audio sources for the embedded or AES audio
outputs. The tones can range from 50Hz to 16kHz.