Sierra Video DAH-239 - Manual (Page 12)

Page 12 of 19 DAH-239 Owner’s Manual
• (V 1.1)
Card Control and Status
Card Status
The card has an LED that indicates whether Dashboard remote control is enabled, or if the switch bank
controls the card. See description of switch 1 below.
The first bank of four LED’s indicates the routing mode. There will be one LED illuminated for output
A and one illuminated for output B, indicating from which input each output is being routed.
The card also indicates the status of each of the outputs signal with the two banks of four LEDs labeled
with the different supported formats (1080, 720, 625, 525). When the card has locked to a particular
output format, that LED will be illuminated. When the card has not locked to a particular video format,
the card will search all possible formats, and the lights will cycle rapidly.
Switches
There is a bank of eight switches (S1) on the front edge that controls the card.
Segment Function
1 Up – Remote control Enabled*
Down – Remote Control Disabled
2 3 Selects Routing
ON ON In 1  Out A, In 2  Out B
ON OFF In 1  Out A, In 1  Out B
OFF ON In 2  Out A, In 2  Out B
OFF OFF Failover (Selects In 1 when present, otherwise In 2)
4 5 Selects Rate for Out A
ON ON Automatic rate determination
ON OFF Reserved
OFF ON 1.4835/1.485 Gbps
OFF OFF 270 Mbps
6 7 Selects Rate for Out B
ON ON Automatic rate determination
ON OFF Reserved
OFF ON 1.4835/1.485 Gbps
OFF OFF 270 Mbps
8 Switch 8 is reserved
* Switch 1 controls the behavior of the rest of the switches. With switch 1 set in the up position,
Dashboard remote control software can change the settings of the card. Consequently the rest of the
onboard switches will have no effect. With switch 1 set in the down position, Dashboard remote control
software is prevented from making changes to the card settings. Consequently the onboard switches 2-8
control the settings.
The factory default settings are as follows
1) Remote Control is enabled.
2) Routing is In 1 ->Out A, In 2 ->Out B.
3) Rates A and B are set to Auto.