Format, Audio input, Save button – Sensoray 2224 Linux User Manual
Page 7: Stream button, Stop button
•
1080I Colorbars: Another test input. Outputs 1080I colorbars. 1080I 50Hz (PAL) or
1080I 60Hz(NTSC).
•
SDI-SD. Standard definition (480i or 576i input) SDI input. Select PAL or NTSC with
the Video Standard dropdown (VIDIOC_S_STD ioctl).
•
SDI-720P 50Hz (Video standard VIDIOC_S_STD selection is unused with this input)
•
SDI-720P 59.94Hz (Video standard VIDIOC_S_STD selection is unused with this
input)
•
SDI-720P 60Hz (Video standard VIDIOC_S_STD selection is unused with this input)
•
SDI-1080I 50Hz (Video standard VIDIOC_S_STD selection is unused with this input)
•
SDI-1080I 59.94Hz (Video standard VIDIOC_S_STD selection is unused with this
input)
•
SDI-1080I 60Hz (Video standard VIDIOC_S_STD selection is unused with this input)
•
SDI-720P 23.98Hz (Video standard VIDIOC_S_STD selection is unused with this
input)
•
SDI-720P 24Hz (Video standard VIDIOC_S_STD selection is unused with this input)
•
SDI-1080I 23.98Hz (Video standard VIDIOC_S_STD selection is unused with this
input)
•
SDI-1080I 24Hz (Video standard VIDIOC_S_STD selection is unused with this input)
Format:
Format is always H.264 inside MPEG-TS. (MPEGTSH264).
Audio Input:
Selects audio input that will be encoded into the MPEG stream (whether it is saved or
streamed).
Save Button:
Save the Video to file. Extension will be .TS. Video may be played back with VLC or
mplayer.
Stream Button:
Streams the H.264 stream over UDP. Enter the destination IP address and port.
Stop Button:
Stops file recording or streaming over the network.