Device name, Capture input – Sensoray 2224 Linux User Manual
Page 6
Device Name
video device to use. For H.264 capture select the device with the Card Name: “Sensoray
Model 2226 H.264”
Capture Input
The input selection for the device. Please note that some inputs are not applicable to the
2226S (2226 with enclosure). The input may not be changed while the device is running
(recording to file, previewing, or streaming).
•
Composite 0
•
SVideo 0 (not on 2226S)
•
Composite 1 (not on 2226S)
•
Svideo 1 (not on 2226S)
•
SD Colorbars: This is a “test” input. It outputs standard definition colorbars.
PAL/NTSC is selected by the video standard selection.
•
720P Colorbars: Test input. Outputs 720P colorbars. If the video standard is set to
NTSC, the frequency is 60Hz. If the video standard is set to PAL, the output is 720P
@50Hz.
Illustration 1: 2226 H.264 Capture Device