Specifications – Sensoray 311 User Manual
Page 6
66
Specifications
Video sources
NTSC, PAL, SECAM, RS-170, CCIR
Video inputs
4 analog composite video; 1 analog Y/C (S-video)
[1]
.
Output formats
RGB (15, 16, 24, 32 bits/pixel), Y8 (8 bits/pixel), YCrCb (16
bits/pixel)
Output resolution (max), pixels
754x480 (NTSC, RS-170),
922x576 (PAL, SECAM, CCIR)
A/D resolution:
luminance channel
chrominance channel
8 bit
8 bit
Capture rate
Real time
[2]
:
30 fps (NTSC, RS-170),
25 fps (PAL, SECAM, CCIR)
General purpose I/O port
4 output and 4 input lines, TTL/CMOS, 1 optocoupled interrupt
input (can be used as an additional general purpose input). (14
pin ribbon cable connector).
Bus requirements
PC104+, 33 MHz, 32-bit, 5 V
Power consumption
300 mA (max) @ +5V
Operating temperature
0
°
C to 70
°
C
Notes:
1. An S-video input can be used in place of 1 composite input.
2. The capture rate may be limited by the PCI-to-DRAM transfer bandwidth provided by the
particular CPU design.