Sensoray 314 - Manual (Page 5)

5 5 5 5
Introduction
Model 314 is a PC/104+ MPEG video and/or audio grabber. It captures video and/or audio from a
standard NTSC/PAL analog video source optional with stereo or monochrome audio source into one
of following compressed MPEG streams: MPEG1, MPEG2, MPEG4, H.263, or MJPEG. It also
supports capturing raw frames from NTSC/PAL video source. The capturing frame rate is up to 30
fps for NTSC and 25 fps for PAL.
A single +5V input power supply is required to power the board, through PC/104+ connector.
Feature Summary
PC/104+-based MPEG video/audio grabber (capturing module)
Raw frame grabbing or previewing feature support
Video input: 4 multiplexed input channels ( 2 S-Video or 4 Composite )
Audio input: 1 pair of stereo or 1 mono
Resolution (Max): Full-D1:
NTSC: 720 x 480 @ 30 fps or 720 x 240 @ 60 fps
PAL:
720 x 576 @ 25 fps or 720 x 288 @ 50 fps
Other supported video Resolution:
D1.N: 720 x 480 D1.P: 720 x 576 D.5: 480 x 352
SIF: 352 x 240 2SIF: 704 x 240 4SIF: 704 x 480
VGA: 640 x 480 QVGA: 320 x 240 QQVGA: 160 x 112
CIF: 352 x 288 QCIF: 176 x 144 SQCIF: 128 x 96
4CIF: 704 x 576
Video encoding formats:
MPEG-4 SP@L3, plus B-frame support, progressive and interlace,
Microsoft, DivX, Sigma Design compatible
MPEG-2 MP@ML, progressive and interlace
MPEG-1
H.263
MJPEG (Motion JPEG)
Bit-rate control: CBR/VBR, 1Kbps to 10 Mbps
OSD (On-Screen Display): 96 characters, 16x16 pixel font, multi-window supported.
Motion detection support
Signal loss detection support
1 digital input and 1 digital output: TTL signals
Driver and SDK for Linux and Windows