Seiko DH33 - Manual (Page 5)

8
English
9
English
●
The alarm can be set to ring once a day at a designated time.
● Once the alarm is set, the set time is shown in the TIME/CALENDAR display.
●
Alarm can be tested.
● Hourly time signal is provided.
REGULAR ALARM SETTING
Press to show REGULAR ALARM display.
Press to show REGULAR ALARM SETTING display.
Press to set the flashing digits.
* The digits move quickly by keeping the button pressed.
With each press, flashing digits change in the
following order:
Hour Minutes
➡
➡
Press to return to REGULAR ALARM display.
▼
▼
▼
▼
▼
Notes:
1. If the watch is left untouched in the REGULAR ALARM SETTING
display, the display will automatically return to the TIME/
CALENDAR in 1 to 2 minutes.
2. When the digits are adjusted in the REGULAR ALARM SETTING
display, the alarm is engaged automatically, and the regular
alarm mark is shown on the display.
3. When setting the hour digits in the 12-hour indication, check that
AM/PM is correctly set. “A” or “P” is shown for the AM or PM
setting, respectively.
ENGAGEMENT/DISENGAGEMENT OF REGULAR ALARM
AND HOURLY TIME SIGNAL
With each press in the REGULAR ALARM display,
the regular alarm and hourly time signal are engaged
and disengaged in the following order:
➡
➡
➡
Both engaged
Neither engaged
Alarm engaged
Hourly time signal engaged
➡
Press to show TIME/CALENDAR display.
Press to show TIME/CALENDAR SETTING display.
TIME/CALENDAR SETTING
• Regular alarm
time is displayed
only when it is
set.
● The time/calendar setting cannot be made for 10 minutes
after a dive.
* If the watch is left untouched in the TIME/CALENDAR SETTING
display, the display will automatically return to the TIME/
CALENDAR in 1 to 2 minutes.
Press to select the digits to be adjusted (flashing).
* With each press, the digits flash in the following order:
Seconds Minutes Hour Year
➡ ➡ ➡
➡
➡
➡ ➡
Date Month 12-/24-hour indication
When all the segments of the display light up:
● If buttons C and D are pressed at the same time in the
TIME/CALENDAR SETTING display, all the segments of
the display will light up. This is not a malfunction. Press
button A, B, C or D to return to the TIME/CALENDAR
display, and set the time/calendar again.
Press to set the flashing digits.
* The digits move quickly by keeping the button pressed.
* When both the hour and minute digits are flashing, changeover
between 12- and 24-hour indications can be made.
* For the 12-hour indication, “AM” or “PM” is shown. There is
no mark for the 24-hour indication.
< Seconds setting >
When the seconds digits are flashing, press button D in
accordance with a time signal. The digits are reset to “00” and
start immediately.
* When the digits count any number from 30 to 59, one minute is
added and the seconds start immediately.
Press to return to TIME/CALENDAR display.
▼
Current
time
Regular
alarm
time
▼
▼
▼
▼
▼
▼
HOW TO USE TIME FUNCTIONS
■ TIME/CALENDAR FUNCTION n REGULAR ALARM FUNCTION
HOW TO USE TIME FUNCTIONS