Directed Electronics Avital G3000 7/01 User Manual

Page 15

2001 Directed Electronics, Inc.

To perform Valet Take-Over:

1. Before turning off the engine, press and release

and

on the transmitter (or press and release the optional Mo-

mentary switch).

2. Turn the ignition key to the OFF position.

(The engine will stay running.)

The engine will run until the pre-programmed

time elapses or a shut-down input is

received. (See the previous Remote Start section for a com-

plete list of shut-down inputs.)

NOTE: This feature will not work if the brake pedal is being pressed.

This remote start system is also designed to interface with most

original equipment from manufacturer (OEM) factory remote

systems. The Remote Start/Valet Take-Over sequence can be pro-

grammed to initiate with one to three (1-3) presses of one of the

OEM transmitter buttons. Consult with your dealer to determine

the transmitter button and the number of presses (1-3) that have

been programmed for this sequence. Spaces are provided below for

writing in the button and number of button presses.

OEM transmitter button used for Remote Start/Valet Take-Over

sequence____________________________________________

Number of presses required to initiate Remote Start/Valet

Take-Over sequence___________________________________

Using Remote Start with Factory Remote Systems