Directed Electronics Avital G3000 7/01 User Manual

Page 13

2001 Directed Electronics, Inc.

While the vehicle is running during remote start operation, the

system will monitor the vehicle and will automatically shut down

the engine if the system receives any of the following shut-down

inputs:

■ The brake pedal is pressed.
■ The hood is opened.
■ The shutdown toggle switch is put into the ON position.
■ The pre-programmed run time has elapsed.
■ Buttons

and

are pressed again.

To shut down the remote start and turn off the engine:
■ Step on the brake pedal, or
■ Press

and

for one second.

Timer Mode automatically starts the engine and runs it for a pre-

programmed time period, every three hours for a total of six

operation cycles. This feature helps to ensure that your engine will

start in the morning after a night of extremely cold temperatures.

IMPORTANT! This feature must only be used in open areas, never in an
enclosed area such as a garage.

To enter Timer Mode:

Start the vehicle by pressing and releasing

and

Press and release

Within two seconds press and release

and

again.

Timer Mode