D-Link DCM-201 User Manual

Page 22

10 Verify that the Power, Cable, Status, and USB LED lights are solid green
and not blinking. If they are lit and not blinking, installation is now
complete; otherwise, see “Troubleshooting the USB Installation” for help.
See “Cable Modem Front and Rear Panels” for more information about
the front panel LEDs.

Installing the Software Drivers (Windows 2000 OS)
(continued)

Installing the Software Drivers (Windows Me OS)

This section explains how to install the cable modem using the USB port with
the Windows Me operating system (OS):
1 Power on the computer. After the computer boots up:

a Windows detects the cable modem.
b The Found New Hardware screen appears.
c The Add New Hardware Wizard screen appears.

2 Insert the D-Link DCM-201 Installation and Documentation CD into the
computer’s CDROM drive.

3 Select Specify the location of the driver (Advanced) and click Next.
4 Follow the on screen prompts to install the software driver from the DCM-
201 Installation and Documentation CD. The location of the file is:

D:\Drivers\
If necessary, replace D with the letter of your computer’s CD-ROM

drive.