9 calibrate the inclinometer, Calibrate the inclinometer – Research Concepts RC300 User Manual

Page 27

Text mode
Original mode

RC300 Flyaway Companion

4.9 Calibrate the Inclinometer

Step 1) Open the configuration page by typing “192.168.252.1/config” into the address bar of your
web browser.

Step 2) Start the inclinometer calibration routine by clicking the “Calibrate Inclinometer…” button.

Step 3) Move your antenna reflector to the face-vertical position.

Step 4) Press OK.

Step 5) Move your antenna up in elevation until reflector is at a 45 degree angle.

Step 6) Press OK.

Research Concepts, Inc. ♦ 5420 Martindale Rd ♦ Shawnee, KS 66218-9680 USA