Remotec ZXT-120 V1.6E User Manual

Page 21

. Insert the ZXT-120 key holes onto the two screws mounted to the wall, and then slide

downward to secure in place.

4. After securing the ZXT-120 to the wall, connect the USB Power or batteries and IR

emitter cable to the ZXT-120.

Note 1: Check that the ZXT-120 is firmly secured to the wall.

Note 2: Insert USB plug or batteries and IR emitter cable so that they are firmly

connected to the ZXT-120.

5. When removing the ZXT-120 from the wall,

lift up the ZXT-120, then pull it towards you.

6. Detach the main unit from the battery

chassis by move toward to top position.