Dual IPLUG XDMA7715 - Manual (Page 8)

8
Press AUDIO momentarily to select between Volume
(default), Bass, Treble, Balance, Fader and *Subwoofer.
Press AUDIO until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press AUDIO until BAL appears then rotate encoder
left/right to adjust (BAL L 12-BAL 00-BAL R 12).
BAL 00 represents equal balance
Press AUDIO until FAD appears then rotate encoder
left/right to adjust (FAD F 12-FAD 00-FAD R 12).
FAD 00 represents equal fader
Press AUDIO until SUB appears then rotate encoder
left/right to adjust (0 minimum / +12 maximum).
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, AUX and Bluetooth modes. This allows you
to save the Bass and Treble settings separately for each
mode.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Press RESET upon initial installation or if abnormal
operation occurs. The reset button is located behind the
faceplate.
Subwoofer option must be enabled before it will appear in
the audio menu. Refer to page 7 for details.
Audio
Bass
Treble
Balance
Fader
*Subwoofer
Source Audio Memory
Reset
*Note
XDMA7715 OPERATION
General Operation
BASS VOLUME TREBLE BALANCE FADER *SUBWOOFER