Dual IPLUG XDMA7715 - Manual (Page 18)

XDMA7715 OPERATION
18
Bluetooth
®
Operation (Optional)
Function Description
Making a Phone Call
Press once. An "_" will appear on the display.
Input the desired phone number using the 0-9, *, # buttons on the
head unit front panel. Press to begin dialing.
A phone call may also be placed from your mobile device using
the keypad, phone book or speed dial. When a call is placed from a
mobile device, “DIALING” will appear on the head unit display.
Last Number Dialing
To enter last number dialing mode, press , then press a second
time. The head unit will display "Last Number Dialing."
Press KEY 0 to cycle through the received, dialed or missed call
categories. Rotate the rotary encoder to cycle through the last 5 calls
in the selected category.
Press to begin dialing the selected number. “DIALING” will appear
on the head unit display.
Receiving a Phone
Call
If an incoming call is detected, the head unit will automatically switch
to Bluetooth mode, muting any current audio.
The incoming phone number will scroll across the display, the phone
icon will flash on the display, and a ring tone will be audible from the
vehicle speakers. See Bluetooth Settings for speaker configurations.
NOTE: The ring audio level will depend the mobile device and head
unit ring volume and audio settings. If the ringer on the mobile device
is off, you may not hear an incoming ring tone.
Press on the head unit or BTM60 to receive a call. The phone icon
will illuminate solid.
Refusing a Call
To refuse an incoming phone call, press and hold MUTE for 3
seconds.
During a Phone Call
The head unit will display the elapsed time of the phone call.
The rotary encoder will adjust the volume of the call.
Press MUTE to select between microphone on (MIC ON) and
microphone off (MIC OFF).
Audio Transfer
To transfer the phone call between the head unit and the mobile
device, press and hold DISP for 3 seconds during a call. Tip: transfer
audio to your mobile device before turning the head unit off.
Call Waiting
When a second call is incoming, press to activate call waiting. The
current call will be placed on hold, and the second call will be active.
Press again to return to the first call.
Call Hold
Press TALK to place the current call on hold. To resume the phone
call, press TALK again.
Ending a Phone Call
Hold MUTE for 3 or more seconds to end a call.
If the phone call was received, the head unit will return to previous
mode when call is ended.