REMKO 4-Way Switching Valve - Manual (Page 8)

8
REMKO
FOUR-WAY SWITCHING VALVE
4 2
After installation is complete and the
subsequent leak test has been per-
formed, the actuator must be attached
to the lower section.
1
■ To do this, remove the rotary knob
used for manual operation.
■ Then insert the supplied plastic
coupling piece on to the axle of the
hydraulic lower section.
Plastic
coupling piece
■ Attach the first of the two supplied
indicators for the direction of rotation
on the front of the actuator above the
rotary knob.
To do this, remove the rotary knob of
the actuator.
3
Indicator for
direction of rotation
(x2)
Rotary knob
■ Attach the second indicator to the
back of the actuator.
Second indicator
First
indicator
All connections must be made with
the unit in a de-energised state
(electrical system).
CAUTION
!