REMKO CLK 20 - Manual (Page 12)

12
Technical Data
Model CLK 20
Max. nominal heat load kW 22
Nominal heat output kW 20
Nominal air volume flow m³/h 1.860
Pressure (max. total) Pa 95
Fuel
EL heating oil or diesel according to DIN 51603 or
diesel fuel
Max. fuel consumption L/h 2.20
Oil nozzle (Danfoss) 2) USG 0.5/60°S
Pump pressure, approx. 2) bar 10.5 – 11.0
Max. chimney loss % 9
Chimney volume, approx. kg/h 35
Furnace resistance, approx. (start/operation) Pa 140/40
Required chimney draft Pa 0
Electrical connection V/Hz 1~ 230/50
Max. power consumption (ges. Gerät) W 320
Max. nominal current (ges. Gerät) A 1.45
Max. power consumption (Ventilator) W 130
Max. nominal current (Ventilator) A 0.6
Operating capacitor of the fan µF 3
Fuse protection (on site) A 10
Temperature increase ( ∆
t
) K 41
Sound pressure level L
pA
1m 3) dB (A) 60
Air outlet ø mm 300
Chimney adapter Ø mm 130
Total unit length mm 1.180
Total unit width/with wheel attachment mm 510/580
Total unit height/with wheel attachment mm 735/880
Weight with forced-air oil burner kg 94
2) The listed nozzle sizes and pump pressures were determined on the basis of adjustment tests on a test stand. The oil throughput was meas-
ured out.
(The specifications serve only as standard values due to product-specific nozzle and pressure tolerances and oil temperatures.)
3) Noise measurement according to DIN 45635 - 01 – Cl. 3 (without burner operation)
We reserve the right to make changes in dimensions and design in the interest of technical advances.