Description of device – REMKO GSG-4 User Manual
Page 3
3
The REMKO GSG-4 control unit is used in combination with an addi-
tional external temperature control (e.g. REMKO ATR-1 or ATR-3) to
connect and control a max. of 4 heaters.
The modes heating, ventilating and resetting the electronic control sys-
tem, can be controlled separately for the individual GPA-C with this unit.
The modes unit operation and burner malfunction are displayed sepa-
rately for each unit by the respective control light.
The control unit is supplied with all accessories to connect a maximum of
4 units. However, the required thermostat control is not included.
Our guarantee becomes null and void if the unit is used improperly
or if modifications are made to the supplied unit.
G
Read these instructions carefully before putting the control unit
into operation and then using it.
G
Description of Device
Unit
1
Unit
2
Unit
3
Unit
4
Operating switch
Operating light
Malfunction light
Reset button
- PWL H (24 pages)
- CLK 150 (20 pages)
- ELT 2-1 (12 pages)
- CLK 170-RV (24 pages)
- DZH 90-2 (20 pages)
- ELT 9 (12 pages)
- ELT 18 S V.2 (12 pages)
- ELT 9-6 (12 pages)
- EST (8 pages)
- PGM 60 (16 pages)
- PGM 12 (12 pages)
- HTL 400 (20 pages)
- PGT 100 (20 pages)
- ATR-3 (16 pages)
- ATR-4 (16 pages)
- SLV11-88-2 (16 pages)
- PWW Series (36 pages)
- GTF-5 (8 pages)
- VRS Series (36 pages)
- GPM 75 (44 pages)
- ATR-2 (8 pages)
- ASF 100 (16 pages)
- ETF 460 (20 pages)
- ETF 320 (20 pages)
- ETF 550 (20 pages)
- WKL 30 INOX (24 pages)
- SLN 80 (20 pages)
- RBW 300 PV-S (48 pages)
- HTS 260 CAMURA (76 pages)
- WKF 180 Duo S-line (64 pages)
- WKF-compact S-Line (96 pages)
- AMT 15 (16 pages)
- AMT 25 (16 pages)
- ETF 220 (16 pages)
- TX 3000 (8 pages)
- PG 50 (16 pages)
- TX 9000 (8 pages)
- CLK 20 (20 pages)
- AT 25 (16 pages)
- DZ 18 HD (16 pages)
- HTK 160 (20 pages)
- PG 12E (16 pages)
- PWL (24 pages)
- PWW 5000 (12 pages)