Dimplex SI 75ZS - Manual (Page 15)

15
APPENDIX: 12.2 EQUIPMENT DATA
Equipment Data
EQUIPMENT DATA for brine-to-water heat pumps for heating purposes
1
TYPE AND COMMERCIAL DESCRIPTION ..50ZSN ..75ZSN ..100ZSN
2
MODEL
2.1 Enclosure type acc. to EN 60 529 IP 21 IP 21 IP 21
2.2 Installation site indoors indoors indoors
3
PERFORMANCE DATA
3.1 Operating temperature limits:
Heating water supply °C max. 60 max. 60 max. 60
Brine (heat source) °C -5 to +25 -5 to +25 -5 to +25
Antifreeze agent monoethylene glycol monoethylene glycol monoethylene glycol
Minimum brine concentration (-13°C freezing temperature) 25% 25% 25%
3.2 Heating water temperature difference at B0 / W35 K 8,9 9,9 9,7
3.3 Heating capacity / coeff.of perform. at B-5 / W55 1) kW / --- 5) 37,5 / 2,4 59,8 / 2,3 76,2 / 2,5
kW / --- 6) 15,0 / 2,1 30,1 / 2,2 33,6 / 2,4
at B0 / W50 1) kW / --- 5) 43,8 / 3,0 69,8 / 2,9 87,9 / 3,1
kW / --- 6) 18,5 / 2,5 33,3 / 2,8 39,1 / 2,8
at B0 / W35 1) kW / --- 5) 46,7 / 4,5 75,2 / 4,4 96,3 / 4,6
kW / --- 6) 23,0 / 4,4 37,6 / 4,3 48,4 / 4,6
3.4 Sound power level dB(A) 65 69 71
3.5 Sound pressure level at a distance of 1 m dB(A) 50 54 55
3.6 Heating water flow rate at internal pressure difference m³/h / Pa 4,5 / 2000 6,5 / 2500 8,5 / 3600
3.7 Brine flow rate at internal pressure difference (heat source) m³/h / Pa 12,8 / 15700 20,5 / 17800 24,0 / 18600
3.8 Refrigerant; total charge weight Type / kg R404A / 8,6 R404A / 12,6 R404A / 20,5
4
DIMENSIONS; CONNECTIONS AND WEIGHT
4.1 Equipment dimensions without connections 4) H x W x L mm 1890 x 1350 x 750 1890 x 1350 x 750 1890 x 1350 x 750
4.2 Equipment connections for heating system inches G 1 1/2'' i/ext. G 2'' i/ext. G 2'' i/ext.
4.3 Equipment connections for heat source inches G 2 1/2'' i/ext. G 2 1/2'' i/ext. G 3'' i/ext.
4.4 Weight of transport unit(s) incl. packaging kg 486 571 652
5
ELECTRICAL CONNECTION
5.1 Nominal voltage; fusing V / A 400 / 50 400 / 63 400 / 80
5.2 Nominal power consumption 1) B0 W35 kW 10,45 16,95 20,93
5.3 Starting current with soft starter A 56 105 120
5.4 Nominal current B0 W35 / cosϕ 5) A / --- 18,9 / 0,8 30,58 / 0,8 37,8 / 0,8
6
COMPLIES WITH EUROPEAN SAFETY REGULATIONS
3) 3) 3)
7
OTHER DESIGN CHARACTERISTICS
7.1 Water inside equipment protected against freezing 2) yes yes yes
7.2 Performance settings 2 2 2
7.3 Controller internal / external internal internal internal
1)
2) The heating circulating pump and the controller of the heat pump must be on standby at all times.
3) See EC Declaration of Conformity
4) Please keep in mind that additional space is required for pipe connections, operation and maintenance.
5) 2-compressor operation
6) 1-compressor operation
Subject to technical modifications Issued: 02.11.2005
These data characterize the size and performance capability of the system. For economic and energetic reasons, additional factors such as balance point and control need to be
taken into consideration. Abbreviations have the following meaning, e.g. B10 / W55: heat source temperature 10 °C and heating water supply temperature 55 °C.