REMKO RXW 350 - Manual (Page 4)

4
Description of Device
The air conditioners in the REMKO RXW 350 / 480 se-
ries are split-design, wall-mounted, direct-condensing
units that can be used for both cooling and heating.
They are to be operated in combination with corre-
sponding REMKO outdoor units.
The way the air conditioning system works is quite sim-
ple; warm air is removed from the room to be cooled.
The environmentally-friendly refrigerant R 410C trans-
ports this warm air.
The units’ primary function is to air-condition rooms.
They also filter and dehumidify the air, thus creating a
comfortable climate in the room. The units also have a
pure ventilation and dehumidification mode. In heating
mode, the warm air absorbed by the outdoor unit is
transferred to the indoor unit.
All units operate fully-automatically and offer a range of
other options thanks to their microprocessor control.
They are operated using the supplied infrared remote
control.
Safety Instructions
Extensive tests have been conducted on the material,
functionality and quality of the units before they were
shipped. These units may only be used in accordance
with their intended purpose. Hazards may arise if the
units are used improperly.
Please make sure to follow these safety instructions.
◊ Make sure that personnel trained in the operation of
the air conditioner check the unit for visible defects
on the operating and safety mechanisms each time
before putting it into operation.
◊ Before performing any work on the unit, the power
cord must be unplugged and the unit secured
against being switched on by unauthorised persons.
◊ Operate the unit only when assembled and for its in-
tended purpose.
◊ Keep in mind that it is hazardous to remove covers,
protective grilles, etc., during operation; this can lead
to uncontrolled operating situations.
◊ Operate the unit exclusively within the permissible op-
erating ranges.
Observe surrounding temperatures.
◊ Make sure that the unit is kept at a safe distance
from flammable objects.
◊ Ensure that no foreign objects block the air intake
and outlet openings.
◊ Do not insert foreign objects into the air intake or
outlet openings of the unit.
◊ Do not place any objects on top of the unit.
◊ Never operate the units in rooms susceptible to ex-
plosions.
◊ The units are also not suitable for operation in rooms
containing large amounts of dust or aggressive air.
◊ Do not use flammable sprays such as hair spray or
spray paint in the direct vicinity of the units.
◊ Do not operate the units if the atmosphere is con-
taminated by oil, sulphur or salt.
◊ Do not expose the units to direct streams of water.
High-pressure cleaners, etc.
◊ Protect the indoor unit and the remote control from
moisture and direct sunlight.
◊ Never open the units’ housing!
This may cause an electric shock.
◊ Regularly check that condensation is not blocked from
flowing out of the units.
◊ Make sure that the outdoor unit is equipped with a
safety mechanism which prevents the condenser from
being damaged caused by the unit switching back on
right away after it has been switched off.
The unit may only be switched back on after 3 min-
utes.
◊ Cleaning and minor maintenance work may only be
performed by the operator or an authorised person
designated by the operator in accordance with the
instructions contained in the "Maintenance and Ser-
vice" section.
◊ These REMKO air conditioners are supplied with the
environmentally-friendly refrigerant R 410 C.
◊ Installation and repair work may only be performed
by authorised personnel.
Transport and Packaging
The units are shipped in a stable transport box made of
cardboard. Please examine the unit when it is deliv-
ered.
Make note of any damage or missing parts on the ship-
ping bill and notify the shipping company and your con-
tract partner. We do not assume any liability for subse-
quent complaints.