beautypg.com

Swing button, Functional process, Cool mode – REMKO RKV 13 T User Manual

Page 6: Cooling, Dehumidification, Cool / dry mode

background image

6

Button functionality
The following commands can be performed using the remote control at a distance of no more than 7m.
Point the remote control at the receiver on the right side of the wall-mounted unit.

Activate and deactivate the indoor unit with the ON / OFF button
The following settings appear on display:

1.

FAN AUTO = Fan speed

2.

SWING = Oscillating blade

3.

25.0 °C = Set temperature

4.

COOL = Mode

On / Off button

25.0

°c

FAN AUTO

COOL

SWING

Swing button

SWING

25.0

°c

FAN AUTO

COOL

SWING

SWING

SWING

Functional process

SWING

SWING

The SWING Taste stops the oscillating blade. When switched on (display ),
the cooled air is distributed better in the room. The unit automatically distributes the air
in a vertical direction only. The air can only be set to be distributed horizontally by
manually adjusting the vertical plate fins.

FAN

When the FAN button is pressed, 3 different-sized fan symbols or FAN AUTO are visi-
ble on the display. The size of the symbol represents the speed of the fan. Each time
the button is pressed, the fan speed is reduced.

Fan button

FAN AUTO

FAN

FAN

FAN

FAN

25.0

°c

FAN

COOL

FAN

Functional process

SWING

TEMP.

Use the COOL mode when you want to cool the room to the desired temperature.
Reduce the desired temperature by pressing the Temperature button in 0.5 °C in-
crements. After you hear a beep, the COMP. display begins to blink for approximately 3
minutes. This waiting period is a forced pause to increase the service life of the com-
pressor and the outdoor part. Once the display stops blinking, the air-conditioner begins
working. If the temperature in the room falls 1 C° below the set temperature, the regula-
tor switches cooling off.

SWING

COOL

25.0

°c

COOL mode

COOL

TEMP.

COOL

l5.5

25.0

COOLING

COOL

COOL

Functional process

FAN

COOL / DRY

DRY

TEMP.

DRY

l5.5

25.0

DEHUMIDIFICATION

COOL / DRY

Functional process

The COOL / DRY mode dehumidifies the room in an unregulated fashion. The tem-
perature of the plate fin exchanger of the indoor unit almost always falls below the dew
point of the air which causes the moisture in the air to condense on the plate fins.
The dehumidification capacity is based on the moisture in the air and the room tem-
perature. After the DRY button has been pressed, the desired temperature can be
selected and the unit begins working. The fan switches off at specific intervals to lower
the plate fin temperature. You can exit this mode by switching to a different one.

25.0

COOL / DRY mode

DRY

SWING

COOL / DRY

°c

FAN AUTO

This manual is related to the following products: