Reel Mowers F-358 - Manual (Page 5)

Model 358
INSTRUCTIONS FOR ASSEMBLING
THREE UNIT GANG
5
Model 5-96
INSTRUCTIONS FOR ASSEMBLING
FIVE UNIT GANG
Assemble mowers into gang unit using outrig-
ger bars as shown. Mount bolts MUST be placed
in holes indicated and nuts tightened securely.
Assemble mowers into gang unit using outrigger
bars as shown. Mounting bolts MIST be placed in
holes indicated and nuts tightened securely.
Outrigger bar “A” is used as a stabilizing bar
between mowers 2 and 3. When attaching this bar
the mounting bolts MUST be placed in the end
holes as shown. Tighten nuts securely then loosen
each nut one full turn to permit bar to pivot.