Reel Mowers HSCC - Manual (Page 6)

Hudson-Star Greensmower Classic Cut
page 6 Copyright © 2008
Hudson Sales & Engineering, Inc.
SECTION III, OPERATION / ADJUSTMENTS
This section covers:
• How to adjust the handle height
for mowing
• How to properly move the
mower when not mowing
• How to use and what not to do
• How to set the cutting height
Handle Height Adjustment
You may adjust the handle to one of
five positions for your most comfortable
operating height. See Figure 2.
Transporting the Mower from
One Location to Another
When you take the mower from one
location to another, for example, from
your garage to the putting green, you’ll
need to change the handle position. This
allows you to push the mower on its rear
roller. To move the handle to the
“transport” position, simply raise the
handle height adjusting bar, move the handle forward, and lower the bar into place in the frame
slots. See Figures 2 and 3. DO NOT move the mower around, while off the green, in its mowing
position.
Operating the Mower
Once you’ve moved the mower to the green and
adjusted the handle, simply push away. With no
gas engine, you won’t even have to wear hearing
protection, so you can enjoy the sounds of nature
while you’re getting ready to improve your golf
game. However, you should always keep your
eyes open for foreign objects in the mowing
path*, such as rocks, twigs, discarded golf clubs,
etc., anything that could get caught in the mower
blades and damage them. Blades damaged by
foreign objects are not covered by warranty.
* Speaking of mowing paths,
please see the Addendum page for
the recommended mowing pattern.
Transport
Position
Mowing
Position
5 Handle
Positions
Frame
Slot
Mowing
Position
Transport
Position
Height
Adjustment
Bar
Swing Handle
Into Proper
Position
Figure 2
Raise &
Lower
Figure 3
Handle Is In The
Transport Position
Front Roller & Blade
must be off the ground